HTME

COURSE OVERVIEW

ME1153 : Rotating Equipment Maintenance & Troubleshooting
Rotating Equipment Maintenance & Troubleshooting
OVERVIEW
COURSE TITLE : ME1153 : Rotating Equipment Maintenance & Troubleshooting
COURSE DATE : Jul 13 - Jul 17 2025
DURATION : 5 Days
INSTRUCTOR : Mr. Andrew Ladwig
VENUE : Cairo, Egypt
COURSE FEE : $ 5500
Register For Course Outline

Course Description

This practical and highly-interactive course includes various practical sessions and exercises. Theory learnt will be applied using our state-of-the-art simulators. 
 
This course is designed to provide participants with a detailed and up-to-date overview of Rotating Equipment Maintenance & Troubleshooting. It covers the applications and importance of rotating equipment in process industry; the equipment classification and operating principles and critical versus non-critical equipment; the centrifugal versus positive displacement, component identification and function and common pump failures; the pump curves and performance analysis, seal and bearing maintenance, inspection, repair and reassembly procedures and troubleshooting pump problems; and the maintenance planning covering preventive versus predictive tasks, maintenance intervals and documentation and spare parts inventory control. 
 
During this interactive course, participants will learn the fault diagnosis, compressor types and applications and gas and steam turbines; aligning and inspecting gearboxes and the common failure modes and lubrication and contamination control; troubleshooting and vibration root causes, shaft alignment fundamentals, coupling types and installation and static and dynamic balancing; the vibration analysis, oil analysis techniques and temperature and acoustic monitoring; and the systematic troubleshooting approach, root cause failure analysis (RCFA) and hands-on troubleshooting scenarios. 

link to course overview PDF

TRAINING METHODOLOGY

This interactive training course includes the following training methodologies:

Lectures
Practical Workshops & Work Presentations
Hands-on Practical Exercises & Case Studies
Simulators (Hardware & Software) & Videos

In an unlikely event, the course instructor may modify the above training methodology for technical reasons.

VIRTUAL TRAINING (IF APPLICABLE)

If this course is delivered online as a Virtual Training, the following limitations will be applicable:

Certificates : Only soft copy certificates will be issued
Training Materials : Only soft copy materials will be issued
Training Methodology : 80% theory, 20% practical
Training Program : 4 hours per day, from 09:30 to 13:30

RELATED COURSES

Gearboxes

ME0230-2D : Gearboxes

Pumps, Compressors, Turbines & Troubleshooting

ME0398 : Pumps, Compressors, Turbines & Troubleshooting

Advanced Valve Technology: Design, Selection, Installation, Applications, Sizing, nspection,  Maintenance & Troubleshooting

ME0240 : Advanced Valve Technology: Design, Selection, Installation, Applications, Sizing, nspection, Maintenance & Troubleshooting

Roll Pass Design and Mill Operation

ME0840 : Roll Pass Design and Mill Operation